Kramer SPK-W411T Скачать руководство пользователя страница 15

Страница: 15 / 18

SPK-W411T - Technical Specifications

Technical Specifications

Audio and Power

DESCRIPTION:

2-way on-wall speakers

FREQUENCY RESPONSE:

100Hz to 20kHz@ -10dB

WOOFER:

4” (102mm) polypropylene cone

TWEETER:

0.51” (13mm) Mylar

IMPEDANCE:

8Ω

NOMINAL SENSITIVITY:

86dB 1W @1m

DIRECTIVITY FACTOR (Q):

6.7 (2kHz)

DIRECTIVITY INDEX (DI)

8.3dB (2kHz)

POWER CAPACITY:

20W RMS

60W continuous program

TRANSFORMER:

70V – 5W/2.5W/1.2

100V – 10W/5W/2.5W

CROSSOVER FREQUENCY:

WOOFER: Full range

TWEETER: High-pass @ 4.5kHz

RECOMMENDED AMPLIFIER POWER:

20W

INPUT CONNECTORS:

Terminal block connectors

Shipping and Installation

MATERIALS:

Frame, grill and brackets steel; cabinet ABS

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

-40° to +70°C (-40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

WEIGHT PER SINGLE SPEAKER:

1.2kg (2.65lbs) approx.

WEIGHT WITH MOUNTING KIT:

1.6kg (3.5lbs) approx.

SHIPPING WEIGHT (FOR PAIR):

3.2kg (7.05lbs) approx.

DIMENSIONS:

11.9cm x 10.5cm x 18.8cm (4.7” x 4.13” x 7.4”), W, D, H.

DIMENSIONS with mounting

brackets:

18.5cm x 10.7cm x 20.9cm (7.28” x 4.23” x 8.2”), W, D, H.

INSTALLATION CLEARANCE:

Front panel to wall (with mounting bracket): 15cm (5.9”)

Back panel to wall (with mounting bracket): 4.5cm (1.8”)

ACCESSORIES:

2 mounting brackets (including 4 knobs and 4 mounting

screws)

OPTIONS:

BCP-2S speaker cable

COLORS:

Available in white or black

Specifications are within a 10% tolerance and are subject to change without notice at

http://www.kramerelectronics.com

Содержание SPK-W411T



















Результаты поиска

Содержание SPK-W411T

Отзывы:

Похожие инструкции для SPK-W411T

Бренды по названию

Популярные бренды

Kramer SPK-W411T, Руководство пользователя

Результаты поиска

Содержание SPK-W411T

Отзывы:

Похожие инструкции для SPK-W411T

Бренды по названию

Популярные бренды