Kramer SPK-C812 Скачать руководство пользователя страница 16

Страница: 16 / 18

ESD Ceiling Speaker - Technical Specifications

Technical Specifications

Technical Specifications of the PRO ESD Ceiling Speakers

INPUT POWER:

40W RMS; max. 80 W; continuous load: 40W (24Hr)

NOMINAL SENSITIVITY:

87dB SPL @1m

CROSSOVER FREQUENCY: 2kHz
MEAN SPL:

87dB +/- 1dB @1W-1m

FREQUENCY RANGE:

Nominal: 80Hz-20kHz; max: 60Hz-20kHz

SPEAKER TYPE:

Two-way closed ceiling speaker

WOOFER:

8” (203mm) polypropylene cone with rubber surround

TWEETER:

4 X 3/4” (19mm) silk dome pivoting tweeter

IMPEDANCE:

Woofer: 8Ω; tweeter: 6Ω

SENSITIVITY:

87dB SPL @1W, 1m

DIMENSIONS:

30cm x 60cm x 10cm (half-tile size); 60cm x 60cm x 10cm (tile size);

59.5cm x 59.5cm x 10cm (tile size) for any region with suspended

ceiling tiles of 595mm

WEIGHT:

6.3kg (13.9lbs) approx. (half-tile size); 6.5kg (14.3lbs) approx. (tile

size)

SHIPPING WEIGHT:

7.8kg (17.2lbs) approx. (half tile); 8.0kg (17.6lbs) approx. (tile size)

ACCESSORIES:

Ceiling mounting bracket (supplied with half-tile size units only)

Specifications are subject to change without notice at

http://www.kramerelectronics.com

Technical Specifications of the EDU ESD Ceiling Speakers

INPUT POWER:

40W RMS; max. 80 W

Continuous load: 40W (24Hr)

NOMINAL SENSITIVITY:

90dB SPL @1m

CROSSOVER FREQUENCY: 2kHz
MEAN SPL:

90dB +/- 1dB @1W-1m

FREQUENCY RANGE:

Nominal: 150Hz-20kHz; max: 100Hz-20kHz

SPEAKER TYPE:

Two-way bass reflex closed ceiling speaker

WOOFER:

8” (203mm) paper cone with rubber surround

TWEETER:

4 X 1” (25mm) titanium dome pivoting tweeter

IMPEDANCE:

Woofer: 8Ω; tweeter: 6Ω

SENSITIVITY:

90dB SPL @1W, 1m

DIMENSIONS:

30cm x 60cm x 10cm (half-tile size); 60cm x 60cm x 10cm (tile size)

WEIGHT:

6.3kg (13.9lbs) approx. (half-tile size); 6.5kg (14.3lbs) approx. (tile

size)

SHIPPING WEIGHT:

7.8kg (17.2lbs) approx. (half-tile size); 8.0kg (17.6lbs) approx. (tile

size)

ACCESSORIES:

Ceiling mounting bracket (supplied with half-tile size units only)

Specifications are subject to change without notice at

http://www.kramerelectronics.com

Содержание SPK-C812



















Результаты поиска

Содержание SPK-C812

Отзывы:

Похожие инструкции для SPK-C812

Бренды по названию

Популярные бренды

Kramer SPK-C812, Руководство пользователя

Результаты поиска

Содержание SPK-C812

Отзывы:

Похожие инструкции для SPK-C812

Бренды по названию

Популярные бренды