Kramer RC-43SL, Руководство пользователя

Страница: 12 / 18

8 RC-43SL - Connecting the RC-43SL
4.2 Connecting the Ethernet Port
The Ethernet connection of the RC-43SL allows you to perform all control functions
of the RC-43SL over the Internet using a PC running the Kramer Site-CTRL control
program.
To connect the RC-43SL to a network:
1. Connect the Ethernet port of the RC-43SL to the Ethernet port on a network
hub or network router, via a straight cable with RJ-45 connectors.
2. Over the network, connect to a PC running Site-CTRL .
After connecting the Ethernet port, you have to install and configure it. For detailed
instructions on how to install and configure your Ethernet port, see the K-Config
Configuration Guide available for download at the Kramer Web site:
www.kramerelectronics.com .
4.3 Connecting the K-NET Port
The K-NET port is wired as shown in Figure 4 .
Figure 4: K-NET Pinout Connection