PT-571/PT-572+ - Overview
3
3
3
Overview
The
PT-571
is a DGKat™ twisted pair transmitter for HDMI signals. The
PT-571
converts an HDMI signal to a single twisted pair signal and the
PT-572+
converts
the twisted pair signal back to an HDMI signal.
The
HDMI Line Transmitter/Receiver
system features:
•
Maximum data rate/bandwidth up to 1.65Gbps
•
HDTV compatibility and HDCP compliance
•
HDMI Support – HDMI (V.1.4 with Deep Color, x.v.Color™, HDMI
Uncompressed Audio Channels, Dolby TrueHD, and DTS-HD)
•
EDID PassThru that passes EDID signals between the source and display
•
3D pass-through
•
System Range – Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on
shielded
BC-DGKat524
cable; 90m (295ft) at 1080i, or up to 70m (230ft) at
1080p on shielded
BC-DGKat623
cable; 100m (330ft) at 1080i or up to 90m
(295ft) at 1080p on shielded
BC-DGKat7a23
cable
Note that the transmission range depends on the signal resolution, graphics card and
display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7a cables may
not reach these ranges
•
DGKat™ Signal Integration – Kramer’s unique technology for converting
TMDS as well as control and communication to signals that run over twisted
pair cables
•
Power Connect™ that feeds 12V DC over the CAT 5 cable from transmitter
to receiver (see
Section 3.2
)
•
Ultra-Compact PicoTOOLS™ – 4 units can be rack mounted side
−by−side in
a 1U rack space with the optional
RK
−4PT
rack adapter.
Use only shielded cable where both ends of the shield are soldered
to ground to eliminate ESD interface.
i
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203