Kramer PT-2C, Руководство пользователя

Страница: 10 / 19

6 PT-2C - Connecting the PT-2C
5 Connecting the PT-2C
Always switch off the power to each device before connecting it to
your
PT-2C . After connecting your PT-2C , connect its power and
then switch on the power to each device.
Figure 2: Connecting the PT-2C Extended EDID Processor
To connect the PT-2C, as illustrated in the example in Figure 2 :
1. Connect the HDMI source (for example, a PC) to the HDMI IN connector.
2. Connect the HDMI OUT connector to an HDMI acceptor (for example, a
display).
3. Connect the USB port to a laptop running EDID Designer to modify the
EDID, or to a PC to upgrade the firmware of the PT-2C .