Operating the PIP-4 Remotely
15
7
Operating the PIP-4 Remotely
You can operate your
PIP-4
remotely via the following:
IR remote controller
Ethernet over a LAN
RS-232 serial commands transmitted by a touch screen system, PC, or other
serial controller
7.1
Operating the PIP-4 Using the PIP-4 Controller Software
The
PIP-4
Control application
1
is used to control the device via either RS-232 or
Ethernet.
For details regarding connecting to the Ethernet port on the
PIP-4
, see
Section 5.2
The Controller software requires the following:
Windows™ XP, Vista or Windows™ 7
Microsoft .Net Framework version 3.5
To install the Controller software, download the software and run the setup file.
After installation, running the Controller software for the first time displays a
window similar to that shown in
Figure 8: PIP-4 Controller Software Main Window
1 Download the application from