KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the Video Isolator
8
5.1 Connecting the OC-1N Video Isolator
To connect the
OC-1N
, as illustrated in the example in Figure 4, do the
following
1
:
1. Connect a video source (for example, a camcorder) to the IN BNC connector.
2. Connect the OUT BNC connector to a video acceptor (for example, a display).
3. Connect the power.
4. If required:
Adjust
2
the video input AMP level and/or the video output, GAIN and
HF levels
Press or release the ground input and/or output GND
buttons
Figure 4: Connecting the OC-1N Video Isolator
1 Switch OFF the power on each device before connecting it to your OC-1N. After powering up your OC-1N, switch on the
power on each device
2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
