NT-52P –
Default Parameters
43
10 Default Parameters
RS-232
Baud Rate:
115200
Data Bits:
8
Stop Bits:
1
Parity:
None
The
NT-52P
is dispatched from the factory with DHCP enabled and a
random IP address. After performing a factory reset, the DHCP and the IP
address are set to the values shown below.
Ethernet
DHCP:
Off
IP Address:
192.168.1.39
Host Name:
NT-52P-xxxx
where xxxx are the last four digits of the serial
number of the device
Subnet Mask:
255.255.0.0
Gateway:
192.168.0.1
Maximum Simultaneous
Connections:
40
TCP Port 1:
5001
TCP Port 2:
5002
UDP Port:
50000
Default Logon Authentication
Web UI Access
User name:
Admin
Password:
Admin