16
KADS-100/KADS-1/KADS-2 - Setting the Speaker ID
7 Setting the Speaker ID
Each speaker must have a unique ID, including those in installations with more
than eight speakers. You can set the ID of the speaker (between 01 and 99) using
the rotary switches on the rear panel of the speaker.
Note
: ID 00 is reserved for system use and if used may cause the system to
malfunction.
Figure 8: Setting the Rotary Switches
To set the ID of a KADS-1 or KADS-2
,
(for example, 28 as shown in
1. Turn the
KADS-100
off.
2. Using a small screwdriver, turn the left hand rotary switch to the required
number of tens; in this example, 2.
3. Turn the right hand rotary switch to the required number of units; in this
example, 8.
4. Turn the
KADS-100
on.
