20
KADS-100/KADS-1/KADS-2 - Operating the KADS-100
8.1.5
Storing and Recalling Configurations
To store a configuration in a preset:
1. Press the STO button.
The button lights red.
2. Press and hold (until the STO button no longer lights) one of the numbered
Keypad buttons in which to store the current configuration.
To restore a configuration from a preset:
1. Press the RCL button from which to recall the configuration.
The button lights red.
2. Press and hold (until the RCL button no longer lights) the numbered Keypad
button from which to recall the configuration.
A progress message is displayed indicating which speaker is being updated.
To lock and unlock the front panel buttons
:
1. Press and hold the Lock button.
The panel buttons are locked and the Lock button lights. Pressing any
button now causes the Lock button to flash for a few seconds.
2. Press and hold the Lock button.
The panel buttons are unlocked and the Lock button no longer lights.
8.1.6
Resetting the KADS-100 to Factory Default Parameters
To reset the KADS-100 to factory default parameters
:
1. Turn off the device.
2. Press and hold the Enter and Esc buttons together.
3. While holding the buttons depressed, turn on the device and wait a few
seconds.
The device is reset to factory default.