52
K-CONFIG - The Driver Manager – Getting Started
2.
Copy the IR Pronto code for the specific machine command (without the quotation marks) and paste it into the
CONVERT PRONTO COMMAND window:
Figure 83: IR Commands – Convert Pronto Command Window
3.
Click OK.
The command has been converted:
Figure 84: IR Commands – Pronto Command Converted
Reading the IR Command via IR Learning
To create IR commands for a selected device, connect the room controller device (with IR learning capability) directly,
whether it is defined as an auxiliary device or a Master device, to your PC and use the remote control transmitter to
learn its IR commands.
Use the remote control transmitter of the machine from which you want to learn the IR commands. For example, use the DVD
remote control transmitter to write the DVD commands to the driver manager.
To create an IR command
:
1.
Connect the room controller device directly to your PC.
2.
Select an IR command (HDMI_1 in this example)
