Kramer Galil 5-O, Руководство пользователя

Страница: 9 / 18

6 Galil 5-O - Installing the Galil 5-O
4 Installing the Galil 5-O
This section explains how to:

Choose the best location for your speakers (see Section
4.1
)

Install the speaker wires (see Section
4.2
)

Install the mounting brackets (see Section
4.3
)

Setup an array installation (see Section
4.4
)

Install the Galil 5-O (see Section
4.5
)
4.1 Choosing the Best Location
Before installing the speakers:

Experiment by placing the speakers in different locations before finally
deciding on the most suitable location

Be sure that the wall type is appropriate for the mounting brackets, that is,
either solid wood, bricks, concrete, hollow building blocks, or wood studs

Check that the mounting location is free of obstructions, such as electrical
piping, AC ducts or water lines, and so on
4.2 Installing the Speaker Wires
To install the speakers, do the following:
1. Prepare the wires for the speakers:

Cut the wires to similar lengths
For achieving high quality sound

Measure the length from each speaker to the receiver, and cut the
wires accordingly, adding some access wire length to let you easily
remove the speakers from the bracket without having to disconnect the
input wires
2. Strip the ends of the wires to expose a length of approximately 3/8 inch.