Kramer Galil 2-C, Руководство пользователя

Страница: 10 / 24

Galil 2-C - Installing the Galil 2-C Closed-back Ceiling Speakers 7
7
5. Route the wiring from the amplifier to the speaker
’s cutout hole, taking care
not to place them next to electrical wires or at least at a distance of about
two feet from an AC line.
Do not nail or staple the speaker wires .
4.3 Mounting the Speaker
To mount the speaker
1. Remove the grille using a grille remover device, and adjust the speaker to
the appropriate tap setting (see Figure 2 ).
Figure 2: Adjust Tap Selector
2. Reattach the grille:

Push the grille fastener into the hole in front of the baffle

Press the grille into place until the front of the grille is flush with the rim
of the baffle

Check that the grille is securely seated
3. Remove the back-can by gently pushing the two snaps in the snap holes
with a screwdriver.
4. Punch out a knockout hole (a small or a large one) that fits the size of the
grommet/cable gland you are about to use.
The speaker cable should fit the grommet/cable gland with minimum space
left (see Figure 3 ).
M ake sure you use a UL94 V-0 compliant grommet/cable gland .