Connecting the FC-8 Wi-Fi - RS-232 Bridge
5
5
Connecting the FC-8 Wi-Fi - RS-232 Bridge
The
FC-8
can be used to wirelessly control an RS-232-based device from a PC
via an ad-hoc network (see
Figure 2
) or via an access point (router) to a larger
network or the Internet (see
Figure 3
).
5.1 Connecting the Controlled Device to the FC-8
To connect a controlled device to the
FC-8
, as the example in
Figure 2
illustrates
1
, connect the RS-232 DB-9 rear panel port on the
FC-8
to the
attached device
2
:
Figure 2: Connecting the FC-8 Wi-Fi - RS-232 Bridge (Ad-Hoc Network)
1 Switch OFF the power on each device before connecting it to your
FC-8
. After connecting your
FC-8
, switch on its power
and then switch on the power on each device
2 Use the same RS-232 wiring as for a connection to the PC
Содержание FC-8
Страница 1: ...Kramer Electronics Ltd USER MANUAL Model FC 8 Wi Fi RS 232 Bridge...
Страница 2: ......
Страница 4: ......
Страница 18: ...14...