Kramer FC-132ETH Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 61

Kramer FC-132ETH Скачать руководство пользователя страница 39

FC-132ETH - Technical Specifications

35

11

Technical Specifications

PORTS:

“Ports”
8 RS-232 Serial Data connections on 3-pin terminal blocks
1 Ethernet on an RJ-45 connector
1 RS-232 Control port on a 3-pin terminal block
“Data”
32 RS-323 Serial Ports on 3-pin terminal blocks
1 RS-232/RS-485 Dual-use port on a 3-pin terminal block

RS-232 COMMUNICATION:

Transparent up to 115200bps

SUPPORTED WEB
BROWSERS:

Microsoft IE V9.0 and higher
Google Chrome
Firefox V3.0 and higher

OVERALL DEVICE BAUDRATE
SUPPORT:

310kbps

POWER CONSUMPTION:

100



240V AC, 50/60Hz, 17VA

CONTROLS:

Front panel buttons, RS-232, RS-485, Ethernet

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

–40° to +70°C (–40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

19” x 7.24” x 1U (W, D, H)

WEIGHT:

1.48kg (3.26lbs) approx.

ACCESSORIES:

Power cord, rack ”ears”

11.1

Data Handling Performance

The

FC-132ETH

is designed to support mainly AV-relevant RS-232 communication.

The device has an overall data bandwidth limit which should be high enough in

most AV installations to support the required communication bandwidth.

In extremely demanding cases, we recommend that you take into account the

bandwidth limitation.

The total sustained data bandwidth that the device can handle for all ports

simultaneously is 310kbps

«
...
37
38
39
40
41
...
»

Содержание FC-132ETH






























































Отзывы:

Нет отзывов