KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the VM-2HDMI 1:2 HDMI Distributor
6
5 Using the VM-2HDMI 1:2 HDMI Distributor
This section describes how to connect the
VM-2HDMI
(see section 5.1) and
how to use the EDID SETUP button (see section 5.2).
5.1 Connecting the VM-2HDMI 1:2 HDMI Distributor
To connect the
VM-2HDMI
, as the example in Figure 3 shows, do the
following
1
:
1. Connect the HDMI source (for example, a DVD) to the HDMI IN
connector.
2. Connect the HDMI OUT connectors
2
to up to 2 HDMI acceptors, as
follows:
HDMI OUT1 connector to HDMI acceptor 1 (for example, an LCD
TV)
HDMI OUT2 connector to HDMI acceptor 2 (for example, a plasma
display)
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Press the EDID SETUP button to acquire or change the EDID
information (see section 5.2).
1 Switch OFF the power on each device before connecting it to your VM-2HDMI. After connecting your VM-2HDMI, switch
on its power and then switch on the power on each device
2 If you are using only one HDMI acceptor, you should connect it to OUT 1