Kramer 840Hxl, Руководство пользователя

Страница: 16 / 30

840Hxl - Operating the 840Hxl Pattern Generator 13
13
6.2.2 Connecting to the Device
To connect to the device:
1. Run the Control Application by clicking Start > Programs > Kramer
Electronics > 840Hxl .
2. Click the Connect button.
The Connection Method window is displayed as shown in Figure 7 .
Figure 7: Connection Method Window
3. Select the required connection method (via a serial or USB connection) by
clicking the relevant option button.
4. For a serial connection, select the required Com port from the drop-down
list.
5. For a USB connection, select the required USB device from the drop-down
list.
To view an up-to-date list of available USB ports, press the
Refresh Ports
button.
Note: If the drop-down list shows No USB Devices , then either the cable is
faulty/not connected, you have not installed the USB driver (see Section 6.2.1 ) or
the installation was not successful.
6. Click Connect .
If the connection is not successful, a Timeout error message appears as
shown in
Figure 8 . If the connection is successful, the main window shown
in Figure 9 appears.