KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the 811 Video / Audio Generator
8
7 Operating the 811 Video / Audio Generator
This section describes how to adjust your video and audio equipment.
7.1 Adjusting your Video Equipment
To adjust your video equipment using the
811
, do the following:
1. Press the VIDEO P or - buttons
1
to generate the required
pattern.
The VIDEO PATTERN 7-segment display shows the selected pattern
number.
2. Observe the output on the acceptors (see Table 5 for reference).
3. Adjust the video equipment, as required.
You can only select one video pattern at a time for all the connected outputs
7.2 Adjusting your Audio Equipment
To adjust your audio equipment using the
811
, do the following:
1. Press the AUDIO AMP or – buttons, and/or the AUDIO
FRE or – buttons to set the desired audio amplitude and
frequency.
2. Adjust your audio equipment, as required.
1 To display the next pattern or
the previous pattern, respectively
