Connecting a Video Line Transmitter/ Receiver System
KRAMER ELECTRONICS, LTD.
6
5.1 Connecting a Dual Video Line Transmitter/ Receiver System
To
configure a
Dual Video Line Transmitter
/
Dual Output Video Line
Receiver
system, using two
705xl
units and four
706xl
units, as Figure 4
illustrates, do the following:
1. Connect a composite video source (for example, a VCR) to the
CV IN
BNC connector on the first
705xl
unit and release the TERM button to Hi-Z.
2. Connect the first
705xl
unit’s
LOOP
connector to the
CV IN
connector on
the second
705xl
unit and push in the Term button (on the second
705xl
unit)
to 75 .
3. Connect the first
705xl
unit’s
OUTPUT 1
terminal block connectors to
the
IN
terminal block connectors on the “A1, A2”
706xl
unit
1
.
4. Connect the first
705xl
unit’s
OUTPUT 2
terminal block connectors to
the
IN
terminal block connectors on the “B1, B2”
706xl
unit
1
.
5. Connect the “A1, A2”
706xl
unit’s
LOOP
terminal block connectors to
the
IN
terminal block connectors on the “A3, A4”
706xl
unit
1
.
This creates transceiver connection A.
6. Connect the “B1, B2”
706xl
unit’s
LOOP
terminal block connectors to
the
IN
terminal block connectors on the “B3, B4”
706xl
unit
1
.
This creates transceiver connection B.
7. Connect the composite video
outputs on up to four pairs of
706xl
units to
their respective composite video
acceptors, as follows:
On the “A1, A2” unit, OUT 1 to acceptor 1A; OUT 2 to acceptor 2A
On the “B1, B2” unit, OUT 1 to acceptor 1B; OUT 2 to acceptor 2B
On the “A3, A4” unit, OUT 1 to acceptor 3A; OUT 2 to acceptor 4A
On the “B3, B4” unit, OUT 1 to acceptor 3B; OUT 2 to acceptor 4B
8. Connect the power adapter on each unit to the electricity supply.
9. Adjust the output signal level and the cable compensation equalization
level individually, for each output, if required.
1 Connect “+ ” to “+”, and “-” to “-” between the terminal block connectors
