614T, 614R - Using the Detachable Optical DVI System
7
4. Connect the
614T
unit
directly
to the display device.
The status LED flashes rapidly while reading the EDID and turns off after
about 7-8 seconds.
5. Disconnect the
614T
from the display.
The new EDID information is stored.
Figure 1: The Auto EDID Button on the 614T
4.2
Connecting the One-Fiber Detachable Optical DVI
System
To
connect the
614T
One-Fiber Detachable Optical DVI-D Transmitter
with the
614R
One-Fiber Detachable Optical DVI-D Receiver
, as the example in
Figure 2
illustrates, do the following:
1. Set the EDID of the display device (see
Section
4.1
).
2. Plug the
614T
DVI connector
directly
to the DVI connector of the computer.
Do not use any intermediate cable or adapter between them.
3. Connect the
614R
to the 5V DC power adapter and connect the adapter to
the mains electricity. The indication LED lights.
4. Connect the
614R
DVI connector
directly
to the DVI connector of the display
device.
Do not use any intermediate cable or adapter between them.
5. Connect the single multimode fiber cable with SC connectors to the
614T
and
614R
modules.
