Series 6
Wireless Full Bin Alarm
Page | 5
Kramble Industries Inc. is not responsible or liable for indirect, special, or consequential damages arising out of or in connection
with the use or performance of the product or other damage with respect to any economic loss, loss of property, loss of revenue
or profit, or costs of removal, installation, or reinstallation.
General Operation
Receiver Console
The Receiver Console is powered by 12 volts DC and is equipped with a Power On/Off button
and a Cancel Alarm (CAN) button on the front of the case. When the Power On/Off button is
pressed, the red LED will light indicating normal operation. Press the Power On/Off button
again to turn power off.
The yellow LED indicates that the Console is receiving a valid RF transmission directed to the Bin Alarm. In
normal operation, when the Sensor Probe is tilted more than its threshold angle (set at manufacture to 30°)
from vertical it transmits an alarm signal, which causes the Yellow “receive” LED to light and the alarm to
activate. The alarm signal is both an array of LED lights and audible beeper acting simultaneously.
The Receiver Console activates the alarm when the alarm signal is received. The alarm remains on for ten
seconds or until the Cancel button is pressed. If the Sensor Probe remains activated the alarm will continue for
60 seconds unless cancelled. While the alarm is active but has been cancelled, the alarm can be reactivated by
pressing the cancel button a second time. If ten seconds pass without receiving an alarm signal and the alarm
has been cancelled, the receiver will automatically reset to normal mode and sound the alarm again should the
sensor subsequently transmit the alarm signal.
Alarm LED Indicator
Probe low battery indicator (green) –
Probe battery needs replacing
FBA Cancel Push to
silence alarm Learn
Control – hold
during power up to
match to a
transmitter
95db
Alarm
Buzzer
+12V Power
Connector
On/Off button & power on
indicator
Receive/Learn
(yellow) – Data
receiving from
transmitter/system
in learn mode
