KRAL BEM 500 Series, Руководство по эксплуатации, Страница: 13 / 64

Operating Instructions OIE 12en Edition 2019-02 13
Installation
In
s
ta
lla
ti
o
n
a
n
d
r
e
m
o
v
a
l
Installation in the control cabinet
The electronic unit can be mounted in control cabinets having a sheet thickness of 0.5 – 5 mm by using
the supplied mounting frame. The mounting frame consists of a front frame
2 and a sealing frame 4 , see
Fig. 2, page 13.
When the space is limited, mounting is also possible without a housing cover
6 and seal with cable
entries 5 , see Fig. 2, page 13.
An adapter set is available for converting BEM 4U to the electronic unit BEM 500, see "Adapter set for
conversion of BEM 4U to BEM 300/500", page 55.
Required minimum mounting depth: 80 mm
Dimensions of front frame:
□
Height: 145 mm
□
Width: 145 mm
□
Depth: 12 mm
Aids:
□
KRAL tool set
1 Electronic unit
2 Front frame
3 Control cabinet
4 Sealing frame
5 Seal with cable
entries
6 Housing cover
Fig. 2 BEM 500 control cabinet installation
a 117 mm
b 117 mm
Fig. 3 Control cabinet section
1
2
3
4
5
6
a
b