Kraissmann 900 BH 26, Руководство пользователя

Страница: 10 / 20

10 |
English
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
▶ Maintain power tools. Check for misalignment or bin -
ding of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use.
▶ Many accidents are caused by poorly maintained pow -
er. Keep cutting tools sharp and clean. Properly main -
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
▶ Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac -
count the working conditions and the work to be per -
formed.
▶ Use of the power tool for operations different from
those intended could result in a hazardous situation.
Service
▶ Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is main -
tained.
Product Description
and Specifications
The tool is designed for drilling with hammer action in
concrete, rock and brick, as well as for chiseling work,
always using the respective correct drill or chisel bit. The
equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user /
operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com
-
mercial, trade or industrial businesses or for equivalent
purposes..
TECHNICAL DATA
Power, W ................................................................. 900
Voltage, V ................................................................ 230
Frequency, Hz .......................................................... 50
No load speed, min
-1
...................................... 0-900
Impact rate, min -1 .........................................
0-4850
Max. drilling capacity, mm................................... 26
Protection class......................................................... II
Noise/Vibration Information
Measured sound values determined according to EN60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 90 dB(A); Sound power level 101
dB(A). Uncertainty K=3 dB.
The hammer drill is not designed for outdoors use as
specified I Article 3 of Directive
2000/14/EC_2005/88/EC.
Wear ear-muffs
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Hammer drilling in concrete
Vibration emission value ah = 15.5 m/s2 K uncertainty = 1.5
m/s2
Chiseling
Vibration emission value ah = 12.5 m/s2 K uncertainty = 1.5
m/s2
Warning!
The specified vibration value was established in accor -
dance with a standardized testing method. It may change
according to how the electric equipment is used and may
exceed the specified value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specified vibration value can be used for initial as
-
sessment of a harmful effect.
Keep the noise emissions and vibrations to a minimum.
▶ Only use appliances which are in perfect working or -
der.
▶ Service and clean the appliance regularly.
▶ Adapt your working style to suit the appliance.
▶ Do not overload the appliance.
▶ Have the appliance serviced whenever necessary.
▶ Switch the appliance off when it is not in use.
▶ Wear protective gloves.
Residual risks
Even if you use this electric power tool in accordance with
instructions, certain residual risks cannot be rules out.
The following hazards may arise in connection with the
equipment’s construction and layout:
▶ Lung damage if no suitable protective dust mask is
used.
▶ Damage to hearing if no suitable ear protection is used.
▶ Health damage caused by hand-arm vibrations if the
equipment is used over a prolonged period or is not
properly guided and maintained.
BEFORE STARTING THE EQUIPMENT
Before you connect the equipment to the mains supply
make sure that the data on the rating plate are identical
to the mains data.
Always pull the power plug before making adjustments