Kraissmann 400 EBS 10/2, Руководство пользователя

Страница: 7 / 16

6 | English 6 | Deutsch Electric Drill-Driver | 7 Electric Drill-Driver | 7
ENGLISH
INTRODUCTION
▶ This tool is intended for drilling in wood, metal, ce -
ramic and plastic as well as for screwdriving.
▶ This tool is not intended for professional use.
▶ Read and save this instruction manual.
SAFETY
GENERAL SAFETY INSTRUCTIONS
⚠WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
▶ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
▶ Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
▶ Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose con -
trol.
ELECTRICAL SAFETY
▶ Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
▶ Avoid body contact with earthed or grounded surfac -
es such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
▶ Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
▶ When operating a power tool outdoors, use an ex -
tension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
▶ If operating a power tool in a damp location is unavoid -
able, use an earth leakage circuit breaker. Use of an
earth leakage circuit breaker reduces the risk of elec
-
tric shock.
PERSONAL SAFETY
▶ Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a pow -
er tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious per -
sonal injury.
▶ Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
▶ Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch
or energizing power tools that have the switch on in
-
vites accidents.
▶ Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in per -
sonal injury.
▶ Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power
tool in unexpected situations.
▶ Dress properly. Do not wear loose clothing or jewel -
ry. Keep your hair, clothing and gloves away from mov -
ing parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
▶ If devices are provided for the connection of dust ex -
traction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
▶ Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it
was designed.
▶ Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be con -
trolled with the switch is dangerous and must be re -
paired.
▶ Disconnect the plug from the power source and/or the