Kraissmann 1500 S-ABS12/2Li, Руководство пользователя, Страница: 7 / 16

6 |
English
6 | Deutsch
Cordless drill /driver | 7
ENGLISH
⚠ IMPORTANT!
When using the equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read the
complete operating instructions and safety regulations
with due care.
Keep this manual in a safe place, so that the information
is available at all times. If you give the equipment to any
other person, hand over these operating instructions and
safety regulations as well. We cannot accept any liability
for damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
SAFETY REGULATIONS
The corresponding safety information can be found in the
enclosed booklet.
⚠ CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fi re and/or
serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
PROPER USE
The cordless drill/screwdriver is designed for tightening
and undoing screws, as well as for drilling in wood, metal
and plastic.
The equipment is to be used only for its prescribed pur
-
pose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com
-
mercial, trade or industrial businesses or for equivalent
purposes.
TECHNICAL DATA
Akku Voltage, V (DC)............................................. 12
Idling speed, min
-1
......................... 0-350/0-1400
Battery Capacity, mAh ....................................
1500
Battery Type ..................................................... Li-Ion
Chuck Size, mm....................................................... 10
Charging time, h ......................................................... 1
Number of accumulators .......................................
2
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
L
pA
sound pressure level............................................ 65,3 dB(A)
K
pA
uncertainty ...........................................................................3 dB
L
WA
sound power level ................................................ 76,3 dB(A)
K
WA
uncertainty ..........................................................................3 dB
Wear ear-muffs
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Drilling in metal
Vibration emission value a
h
≤ 2.5 m/s2
K uncertainty = 1.5 m/s2
Screwing without hammer action
Vibration emission value a
h
≤ 2.5 m/s2
K uncertainty = 1.5 m/s2
WARNING!
The specifi ed vibration value was established in accor -
dance with a standardized testing method. It may change
according to how the electric equipment is used and may
exceed the specifi ed value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specifi ed vibration value can be used for initial as
-
sessment of a harmful effect.
Keep the noise emissions and
vibrations to a minimum.
▶ Only use appliances which are in perfect working or -
der
▶ Service and clean the appliance regularly
▶ Adapt your working style to suit the appliance
▶ Do not overload the appliance
▶ Have the appliance serviced whenever necessary
▶ Switch the appliance off when it is not in use
▶ Wear protective gloves