3
• Read, understand, and follow all printed materials provided with and on this product before
use.
• Do not exceed rated capacity! Rated capacity is: 150 kg (includes person, tools, equipment,
personal items).
• Sit down gently! Avoid shock loads caused by jumping or falling onto seat.
• Do not stand on seat.
• Beware of pinch and crush hazards when folding and unfolding.
• Keep out of the reach of children! This device is not appropriate for children’s use.
• Use on smooth, level surfaces only.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
and Figure 1 illustration. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Contents: 1 creeper body, 6 casters, 6 fasteners
Dimensions: 1020 x 455 x 150 mm
ASSEMBLY INSTRUCTIONS
(Refer to Figure 1)
1. Carefully unfold the creeper as seen in Fig. 1.
Keep hands away from
pinch and crush points
that are created while folding and unfolding!
2. Use a suitable screwdriver to attach the head cusion to Head Frame. Hand tighten with screwdriver.
3. Use a 5 mm hex-key to attach the casters to the Rear Frame. Insert the threaded fasteners from above, the
casters from below (as seen in Fig. 1), then hand tighten with hex key.
OPERATING INSTRUCTIONS
(Refer to Figure 2, Figure 3)
Little instruction is necessary for the safe and proper use if all warning information is understood and followed.
Keep hands away from
pinch and crush points that are created during use!
Be alert
and sober when
using this product! Never operate this equipment when under the influence of drugs or alcohol.
WARNING
To transform creeper into seat position
To transform seat into creeper position
Figure 3
Step 1. Locate, then unlock the spring loaded lock
pin by pulling out until disengaged, at the same time
flip the Head Frame and Middle Frame upward and
back towards the Rear Frame section until the Lock
Pin can engage the Creeper Seat Locking Sleeve
(Fig. 3). Ensure Lock Pin is fully engaged.
Step 2. Flip the Head Frame forward until horizontal.
Figure 2
Step 3. Unlock the spring loaded Lock Pin by pulling
out until disengaged, then reverse steps 1, 2 to
convert Creeper Seat into Creeper.
lock pin
lock pin