KPN Mobile Internet Router 850, Быстрый старт, Страница: 5 / 12

5
Important: By default, your (U)SIM-card is protected by a PIN-code, which is 0000.
Your MIR850 will not make a connection to the mobile network and to the Internet,
until this PIN is verified. Until that moment, the LED of the “Signal” will blink RED
(see also chapter 4).
There are two ways to verify this PIN:
a. In the Web Management Software (see Step 10 for this) go to menu ‘Advanced Settings’
and then to “SIM Settings”. Here you can enter the PIN, and also make a setting that
from now the MIR850 automatically verifies this PIN itself, every time at starting up.
b. First put the SIM in a mobile handset, and in the security menu de-activate the
PIN on the SIM. The disadvantage of this is, that if the SIM is stolen out of the
MIR850, it can be used without restriction in another device, because there is
no security any more. That’s why this method is not recommended!
Step : Connect to the Power Adapter
Use a power adapter that is compatible with the MIR850, otherwise, the MIR850
may be damaged.
Step 3: Connect to a PC
Connect your PC or laptop to one of the 4 wired ports with an Ethernet cable (CAT5).
The green Ethernet indicator light will now go on. The Ethernet cable cannot be longer
than 100 meters (38 feet). To achief better results, shielded cable can be used.
Step 4: Connect to a telephone Set (Optional)
The communication quality of the
telephone set can be interfered
by the wireless signal, which gives
unwanted sounds and noise. Place
the telephone set at least one
meter away from the MIR850.
Step 4