MIK820 Quick Start Manual, V1.0
Page 4 of 14
3.
Indicator
It indicates the status of the data card.
When the data card is powered on, the indicator is blinking in green. (The
indicator is on for 100 ms and off for 100 ms, and then on for 100 ms and
off for 2700 ms.)
When the data card has registered to a GPRS (GSM/GPRS/EDGE)
network, the indicator is blinking in green. (The indicator is on for 100 ms
and off for 2900 ms.)
When the data card has registered to a UMTS (WCDMA/HSPA) network,
the indicator is blinking in blue. (The indicator is on for
100 ms and off for 2900 ms.)
When the data card has been connected to a GPRS network, the indicator
is on in green.
When the data card has been connected to a WCDMA network, the
indicator is on in blue.
When the data card has been connected to a HSPA network, the indicator
is on in cyan.
When the data card is removed, the indicator is off.
Preparation
1.
Requirements for the Laptop
To use the KPN MIK820 data card, the following configurations for the
laptop are required.
Equipped with ExpressCard slot.
CPU: 133 MHz Pentium or above. 500 MHz Pentium or above is
recommended.
Memory: 128 MB RAM or above.
Free space on the hard disk: 50 MB or above.
Windows XP/ 2000/ Vista is installed.
Resolution for the laptop screen: 800 × 600 or above. 1024 × 768 is
recommended.
