MAINTENANCE OF MOTORS
The motors used on both blower fan and
flame simulator assembly are prelubricated
for the extended warranty of the motor, no
further lubrication is required. However,
periodic cleaning/vacuuming of the fan/heater
unit is recommended.
GLASS INFORMATION
1. Under no circumstances should this
product be operated with missing or broken
glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the
glass.
4. Replacement glass is available from the
manufacturer and replacement should be
carried out by a qualified service person.
The heater has two functions. One is the
simulated fire and the second is the heater
The switches are located on the top of the
stove and under the round cover
CLEANING
To clean the unit, first turn off controls on unit
and unplug unit from power source.
To clean the glass door: remove dust with
clean dry cloth or to remove finger prints and
other marks clean glass with clean damp
cloth. Do not use abrasive cleaners or spray
liquids on glass door surfaces.
Metal and metal painted parts should be
cleaned with clean damp cloth only. Do not
use abrasive cleaners or spray liquids on this
surface.
1. ON/OFF FLAME: Press this button to on
position for the main power and the flame effect.
2. FAN: Press this bottom to Start the blower.
3. Before turning on the heat, please be sure
that ON/OFF FLAME & FAN buttons are pushed
to on position.
4. 750W: There two switches of 750W. Press
either one to get 750W heat.
5. 1500W: The unit will run on 1500W with both
750W buttons pushed to on position.
6. THERMOSTAT CONTROL: The left knob is
for thermostat control. Turn CLOCKWISE
(Right) to highest setting until room temperature
is comfortable. Then rotate the knob COUNTER
CLOCKWISE (Left) until the heater cycles OFF.
At this SET POINT the heater will cycle ON and
OFF to maintain this comfort level.
7. FLAME INTENSITY: The right side knob is to
adjust the intensity of the simulated flame effect.
Rotate the knob CLOCKWISE to get a brighter
flame, and turn the knob COUNTER
CLOCKWISE to get a dimmer flame.
4
WARNING: Make sure
that the power is turned
off before proceeding.
OPERATING INSTRUCTIONS
ON/OFF
750W
FAN
750W
1500W
FLAME