Kozy-World EF6023R, Инструкция по установке и руководство пользователя, Страница: 8 / 12

8
7
Operating Instructions
Heater Front View
Remote Control Front
Remote Control Back
Before programming your transmitter you must
first insert two
“ AAA ” batteries.
Make sure the main power on/off switch is “ ON ”
position.
1. The ON/OFF button:
*Note: When Fireplace is first operated,
the default setting will be: brightest
flame, and full heating To turn on Heater,
press the
“ ON/OFF ” button. Heaters will
be at the last settings before shutting
down. To turn off heater, press the
“ ON/
OFF ” button again.
2. Flame brightness setting:
There are six settings for flame
brightness: “ 1 ” , “ 2 ” , “ 3 ” , “ 4 ” , “ 5 ” and “ 6
(OFF) ” . Press button to decrease
the flame brightness, and button to
increase the flame brightness.
3. Heating level setting:
There are four settings for heating level:
“ HI ” , “ MID ” , “ LOW ” , and “ OFF ” . Press
button to decrease the Heating level
and button to increase the Heating
level. If set on
“ HI ” , the set room tem-
perature will be approximately 90 ° F; set
on “ MID ” , the set room temperature will
be approximately 80 ° F; set on “ LOW ” ,
the set room temperature will be
approximately 70
° F.
Press “ ON/OFF ” button to turn on or off the fireplace.
Press “ HEAT Adjust ” button to control heater.
Press “ FLAME ” button to control the Flame brightness.
Manual Operation (without handheld remote)