Step 3: Attach the SIDE PANEL (C) to the FRONT PANEL (D) with 6 KD SCREWS (3 screws
for each side). See Figure C.
Step 4: Attach the LEFT and RIGHT SIDE PANELS (C, D, & G) to the BASE (B) using 4 KD
SCREWS (2 screws for each side). See Figure D.
Step 5: Place the LOWER FRONT PANEL (F) in between the lower section of 2 FRONT
PANELS (D) and attach with 2 KD SCREWS (1 screw for each side). See Figure E.
Step 6: Carefully place the INSERT into the unit opening. The front of INSERT should be
flush with the front of the mantle. Once the INSERT is in place, attach 2 MOUNTING
BRACKETS (V) with 2 KD SCREWS onto the bottom of the INSERT (1 screw for each brack-
et). See Figure F.
5