20 FACING AND FINISHING
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#SP-34 LE & MV R.5 January 2020
4.2 Safety Barrier Installation
4.2.1 Safety Barrier Screen (#SP34-SCR)
1. Locate the (4) slots located on each side of the fireplace frame.
2. Align the notched tabs located on the back of the safety screen
with the slots on the fireplace frame.
3. Raise the safety screen front slightly into slots and allow the tabs
to lower into position.
•
To remove safety screen: lift the screen up and out of slots.
4.2.2 Overlay Designs (#SP34-POL & #SP34A-POL)
1. If installed, remove the safety barrier screen.
2. Center the overlay over the safety screen.
3. Locate the (4) tabs on the overlay. Hand bend tabs to secure the
overlay to the safety screen front.
4. Locate the (4) slots located on each side of the fireplace frame.
5. Align the notched tabs located on the back of the safety screen
with the slots on the fireplace frame.
6. Raise the safety barrier slightly into slots and allow the tabs to
lower into position.
•
To remove safety barrier: lift the screen up and out of slots.
Figure 4.2, ,Safety Barrier Screen Installation
