SECTION 3
FRAMING
16
#LXL-22-L
R.1 4 . 2 0 . 2022
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
3.6
Outdoor Covered Gas
3.6.2 Requirements
Outdoor Covered Gas Stove Installation
Stove Installation
An outdoor covered gas stove installation allows a gas stove to be
installed in an outdoor covered area, where the appliance is protected
from direct precipitation.
Follow the instructions and illustrations in this section for installation
procedures.
3.6.1 Safety Screen Barriers
Hussong Mfg. highly recommends to use black painted safety barriers
in outdoor installations. Other screen barriers that incorporate
a plated or patina finish are highly susceptible to oxidation and
discoloration.
•
Calculate your roof overhang dimensions by following
FIGURE
3.6
below.
•
The continuous insulated building envelope and weatherproof
membrane are not to be interrupted by gas stove installation.
See
FIGURE 3.7
on page 17.
•
Gas stove operation is approved from 40°F to 110°F.
•
All wiring connections shall be in accordance with outdoor
requirements of NECA NFPA 70.
•
All clearances and requirements in your appliance manual must
be adhered to.
A
B
C
C
The overhang (A) must be a minimum of 1/2 or
greater of the roofline elevation (B) above the base
of the gas stove.
The width of the overhang to each side of the
appliance (C) must be a minimum of 1/2 or
greater of the roofline elevation (B) above the
base of the gas stove.
EXAMPLE: If roofline (B) is 10’ above the base of gas stove, the overhang (A) must be 5’
or greater. The width of the overhang to EACH side of the gas stove (C) must be 5’ or greater.
FIGURE 3.6
Outdoor Covered Gas Stove Install - 1
Side of
Gas Stove
Front of
Gas Stove
