58
FIREPLACE SETUP
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
#CLW-ST R.1 February 2021
Burner media installation
Install an even layer across the whole burner (shaded area)
#903-LAV: Install the 2 lb. (0.9 kg) bag ONLY
Perimeter media installation
Install an even layer across the front and rear perimeter (shaded area)
8.2 Burner/Perimeter Media Installation
WARNING: DO NOT BLOCK PILOT WITH MEDIA. A BLOCKED PILOT MAY
CAUSE DELAYED IGNITION.
8.2.1 Burner Media Kits
(#903-LAV, #304-COP, #304-BLK)
1. Install an even layer of your chosen media across the whole
burner. See Figure 8.3 below.
#903-LAV: Install the 2 lb. (0.9 kg) bag ONLY included with the
kit.
2. Save any unused media for later use.
8.2.2 Perimeter Media Kits
(#904-LAV, #306-COP, #306-BLK, #105-VERM, #104-SAND-B)
1. Install an even layer of media across the front and rear perimeter.
See Figure 8.3 below.
2. Save any unused media for later use.
Figure 8.3, Media Installation
