150Mbps Wireless N Router
43
change will have on your AP
Authentications type: The default is set to “Auto”, which allows “Open System” or “Shared
Key” authentication to be used. Select “Shared Key” if you only want to use “Shared Key”
authentication (the sender and recipient use a WEP key for authentication)
Beacon Interval: The interval time of this Wireless N Router broadcast a beacon. Beacon is
used to synchronize the wireless network. The valid interval is 20-1000, the default is 100
RTS Threshold: You can set RTS Threshold value in this field, the valid range should be
256-2347 and default value is 2347. If a network packet is smaller than the preset RTS
threshold size, the RTS/CTS mechanism will not be enabled
Aggregation: You can accelerate the wireless transmission speed by enabling the
aggregation function. The default is AMPDU
＋
AMSDU
Fragmentation Threshold: It specifies the maximum size of packet during the
fragmentation of data to be transmitted
Transmission Rate: Transmit rate indicates the transmission speed of wireless LAN
access .The default setting is “Auto” and you can set this value between 1-54Mbps range
ShortGi: You can select “Enable” or “disable” for shortgi
Protection: Using 802.11b and 802.11g mixed mode may result in poor network
performance. By enabling 802.11 protection, it will ameliorate performance of 802.11g
devices in your wireless network
Preamble Type: "Short Preamble" is suitable for heavy traffic wireless network. "Long
Preamble" provides much communication reliability; the default setting is "Long
Preamble”
4.6.
Security setup
This feature provides security and network protection by using “MAC Filter”, “Internet access
control” and “DNS Filter”
