Kowa Nonmyd 8S, Инструкция по эксплуатации, Страница: 5 / 60

III
Caution
Prohibitory
Do not pull on the power supply cable when unplugging the instrument from the power outlet.
Doing so may damage the cable and cause a fire or electric shock. Make sure to hold the pow -
er plug when unplugging the instrument.
Do not install the instrument on an unstable location such as on a shaky base or a tilting sur-
face. Otherwise, the instrument may drop or fall over causing a bodily injury.
Caution
High-
temperature
Do not replace the flash lamp immediately after turning the OFF the main power.
You could be burned by the lamp heated to a high temperature. Wait for more
than 10 minutes to cool the lamp down before replacing.
Do not touch the flash lamp bulb with your bare hand. Otherwise, flash intensity and lamp lon -
gevity may be reduced.
Do not increase the observation illumination light intensity more than required. Otherwise, the
eye may be injured.
Do not increase the flash intensity more than required. Otherwise, the patient may experience
pain and his or her eye may be injured.
The air vent must not be obstructed. Obstructing the air vent may increase the internal tem-
perature resulting in malfunctioning of the instrument or a fire.
When operating this instrument, keep your fingers off the gap between the optical component
and the power supply or the chin rest support and the forehead rest support, or the gap under -
neath the chin rest. Otherwise, the fingers may be pinched and injured. Instruct the patient not
to place his or her fingers on the instrument.
Do not wipe the outer surface of the instrument with solvents such as benzene, or ether. Doing
so may cause discoloration or degradation.
Obligatory
The power supply must be provided for the sole use of this instrument. Sharing the same pow-
er supply with other external devices may cause instrument malfunction.
When moving the chin rest up or down to adjust the height of the examined eye, carefully op -
erate the instrument while checking the position of the patient’s head. A patient with a smaller
head may have his or her head caught between the components.
Make sure that the instrument are not in contact with the patient's eye or the nose when in op -
eration. Otherwise, the ptient may likely be injured.
Handle fuses with care. Otherwise, glass components may be damaged causing bodily injury.
A A
A
A
A
A
B
C
A
A
A
D
D
Caution
A : Keep your finger off the locations shown with an arrow “A” when operating the
instrument. Otherwise, the fingers may be pinched and injured.
Instruct the patient not to place his or her fingers on the instrument.
B : Take good care so that the patient’s eye, nose or face does not come in contact with
the locations shown with an arrow “B” when operating the instrument.
C : When moving up or down the chin rest to adjust the height of the patient’s eyes, carefully
manipulate the instrument while checking the position of the patients’ head.
A patient with the smaller head may get his or her head caught between the components.
D : The air vent must not be obstructed. Obstructing the air vent may increase the
internal temperature resulting in malfunction of the instrument or a fire.
D : Do not insert any metal object into an air vent or opening of the instrument.
It may cause electrical shock and malfunctioning of the instrument.
Keep your finger off the spaces shown with an arrow. Otherwise, you may be injured.