KOVAX : 910-0820, Инструкция по эксплуатации

Страница: 11 / 16

PAGE 11 | PROMA-X DUST EXTRACTOR
Pneumatic tool connections
- Check for the tool switch turned off before connecting it to the front panel quick coupling.
- Connect the tool to the appliance with the quick couplings (17) (pic. 4) and (18) (pic. 6).
- Connect the coaxial hose (optional) to the quick coupling (20) (pic.6).
Preliminary checks
- Check the tool functioning as indicated on their instructions manual.
- Check that the dust collection bag (30) has been fitted in the container (25) and that the filters (23) have been fitted
on the head.
- Check that the vacuum hose is properly fixed and does not hinder tool movement.
- Check that there are no leaks in the compressed air supply system.
Machine use
The machine can operate in manual or automatic mode: to select the mode, turn the switch (12) to the right (automatic
mode) or to the left (manual mode) (pic. 23). The green indicator (13) turns on when the vacuum motor starts.
Using the machine in automatic mode (A)
Automatic operations mean that the vacuum starts when an electrical or pneumatic tool is turned on. The vacuum will
automatically turn off eight seconds after the tool is turned off.
Using the machine in manual mode (M)
Manual operations mean that the vacuum runs continuously. Power on the front panel outlet socket is permanently active
during manual running.
Adjusting the vacuum level
The vacuum level can be adjusted in both operating modes by turning the knob (12) towards the "min" position until the
desired power is reached.
Automatic cleaning of the filters
The machine has a timed filter cleaning system that maintains the vacuum strength constant.
It is also possible to perform a complete cleaning cycle as follows (pic. 19):
- switch the machine off;
- cap the vacuum sleeve;
- restart the machine keeping the sleeve capped for 15 seconds.
Suction hose setting (M-class only)
For operator’s safety the appliance for M-class dust are provided with an indicator which operates in case of the air
velocity through the hose falling below 20 m/sec. Check the hose diameter and set the correct value on the front
panel throttle (32) (pic. 23). Always use genuine Kovax hoses.
GETTING STARTED & MACHINE USE