Kospel Optimus EPJ-3, Инструкции по эксплуатации и монтажу

Страница: 9 / 12

ENG-002B/p.278
9
In case the appliance does not heat water, check for possible reasons:
- a failure of the mains supplies (e.g. fuses),
- insufficient flow through the heater (e.g. dirty filter, incorrect setting of the flow regulating valve) - refer to
"Flow regulation".
The guarantee does not cover the above repairs.
If there is a fault in the appliance (the heater does not work and all the above reasons do not occur), contact
the nearest authorised service.
EPJ - water heater - 1 piece,
Tap set - 2 piece,
Gasket - 1 piece,
Spanner for regulating the flow - 1 piece,
Screw - 1 piece,
Sleeve - 1 piece,
Set contents
Faults
If the inseparable supply cord
will become damage, it should
be replaced at the manufacturer
or in special repair shop or by
a qualified person in order to
avoid all risks.
This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities or
lack of experience and knowl-
edge, unless they have been
given supervision or instruction
concerning use of the appliance
by a person responsible for their
safety.
Children should be supervised
to ensure that they do not play
with the appliance.