26
Temperature setting
Display shows three icons:
You can set the desired temperature
value (which has been stored in memory for each icon) by pressing one of them
- the icons will be displayed in inverse
.
To change the desired temperature value:
•
push the icon,
•
push the icon again and keep (for about 3 seconds) until the value starts to flicker,
•
to set the new value press
,
•
to save the value press icon.
Notice: save the new value within 10 seconds, otherwise you will lose it.
Configuration
To enter the configuration mode press B . To adjust the value press
The
parameters will switch as you press
. You can switch between the following
parameters:
•
maximum temperature value,
•
display contrast (0-20),
•
display brightness in stand-by-mode (0-20) /brightness min. / (0 – brightness max.),
•
display brightness in active mode (0-20) /brightness max. / (brightness min. –20).
To exit parameters setting mode press
Notice: parameters setting mode will
automatically exit after 20 seconds since the last adjustment.
Parameters view
To enter the parameters view mode press A .The parameters will switch as you press
. You can switch between the following parameters:
•
flow rate
,
•
percentage of maximum power with which the unit currently heats
,
•
rated power
,
•
correction of power
,
•
software details and work time,
•
inlet temp
,
•
outlet temp
.
To exit the parameters view mode press
. Notice: parameters view mode will
automatically exit after 5 minutes since the last adjustment.
Содержание KDE 12
Страница 39: ......
Страница 40: ...KOSPEL S A ul Olchowa 1 75 136 Koszalin tel 48 94 346 38 08 info kospel pl www kospel pl ...
