Kospel EPS - 3,5, Руководство пользователя

Страница: 4 / 8

4
Venting
1. Shut off electric supplies.
2. Turn the flow on (turn the hot water tap on) in order to vent the installation until the flow of water
becomes constant and even.
3. Shut off the flow.
4. Switch on the electric supplies.
ATTENTION!
Vent the appliance every time after a decay of water.
Operation
The heater is produced in 2 versions: with and without power changing knob (Fig.4 and Fig.3 re-
spectively) which is placed on the front cover.
There are 2 possible positions that the knob can be situated. In “(“ position the appliance uses lower
power than in a position “
))
” – in that case the maximum power is used. The knob is easily turned in
both directions.
ATTENTION!
In case of water shortage the tap should be shut immediately. The appliance should be vented
as soon as a water supply is back (see ‘Venting’).
3
Fig.3 Operating indicator EPS-3,5; EPS-4,4
[1] – ‘heat on’ indicator (lamp)
4
Fig.4 Operating indicator EPS-5,5
[1] – 'heat on’ indicator (lamp)
[2] – power changing knob