2-3
Wiring installation instructions
Original main wire
Installation description
2-2
Please proceed as follows
Bracket Bushing (Accessories 2)
Collar
(Accessories 3)
M5 washer
(Accessories 4)
❶
❷
LCD Meter (
Accessories 1)
❸
❹
M5 nut(Accessories 5)
❺
❶
❹
❸
❺
❷
NOTE
Please refer to the icon to disassemble. And install according to
the reverse order of disassembly.
wh051ba15a
2-4
1
2
3
3.Wrap up insulation tape on waterproof cover,
wiring PVC pipe and the gap between the
waterproof cover and original waterproof
cover,as shown in the red circled part.
❶
❶
❷
❷
1.Push the waterproof cover of the KOSO
BOLT Meter
❶ until the connector
❷ is
exposed outside the cover.
2.
❶
plug the connector in with the vehicle
main harness connector.
❷
The pull back the
waterproof cover to fully cover the both
connectors & vehicle main harness connector).
waterproof cover from KOSO BOLT
Meter needs to be overlapped with vehicle
main harness rubber connector cover.
Actual wire installation precautions
NOTE
