Koso REXA Electraulic Xpac, Инструкция по установке и эксплуатации

Страница: 18 / 164

Xpac
Installation Manual -- Version 5.1 (5/08)
10
REXA
Electraulic Actuators & Drives
2 DELIVERY
2.1 Receipt
Inspect the crate and make note of any physical damage. If severe
damage is present, then consideration should be given to rejecting the
shipment and contacting the shipping company concerning in-transit
damage claims.
REXA makes every effort to properly package the
product so that it is shipped and received without damage.
2.2 Storage
If the actuator and control enclosure are not immediately installed,
provisions for storage must be made. The equipment should not be
removed from the original containers. The ambient environment
must be:
✔
Clean —no airborne particles or contaminants
✔
Non Corrosive —minute quantities of gases can concentrate
in a confined area
✔
Dry —relative humidity must be sufficiently low to prevent
moisture condensation on chilled metal components
✔
Temperature —recommended storage temperature is be-
tween 10°F (–12°C) and 120°F (50°C)
2.3 Unpacking
The REXA Xpac actuator is shipped completely filled with oil and
ready to be installed. It has been operated, tested and thoroughly
inspected. After removing the actuator from the packaging, inspect
it for any signs of mechanical damage that may have occurred during
shipping. Immediately report any damage to the factory.
Compare the contents to the packing list included with every shipment.
Immediately report any discrepancies to the factory.