2-1
2-2
1.
2.
3.
2.
4.
5.
7.
8.
6.
1.M5 X 12L screw X 2 Accessory 13
2.Meter bracket for handle bar Accessory 12
3.Fix the bracket on handle bar (7/8 inch)
4.
Accessory 12
5.M4 screw X 2 Accessory 14
6.M4 gasket X 2 Accessory 15
7.Meter fixed board Accessory 12
8.Meter Accessory1
(
)
(
)
(
)
(
)
(
)
(
)
(
)
Meter bracket clip
Some of the option accessories may not sell. For the details, please contact the local distributor.
The advantage of the active speed sensor is as following, 1. You don't need to install the magnet in the opposite position of the speed
sensor. 2. You could set up the sensor signal input up to 60 points, and the speed displayed will be more accurate. Please note that the
speed sensor attached in the kit is passive speed sensor, and the maximum speed signal it could read is 20 points.
Wiring installation instructions
Installation instructions
When installing, please follow the process.
Please adjust the meter to the best visible angle before
tightening the screw
A. Push meter bracket
clip up to lock meter
fix board with meter
on bracket
(
)
B. Push meter bracket
clip down to release
meter fix board with
meter on bracket
(
)
Special instruction for meter fix board.
Gree-Yellow
/ Low beam light +12V
(
)
EM
S
C
D
I
A
Black / Ground wire connect to the vehicle
body or the engine (It must be a good ground)
Yellow / High beam light (+12V)
White / Neutral light ( -)
Green / fuel (-)
Orange / L turn signal (+12V)
Blue / R turn signal (+12V)
Gray / OIL light (+ / -)
Main wiring (Accessory 2)
Meter (Accessory 1)
Active speed sensor (Accessory 4)
Brown-
/ RPM wire please connect it to the
suitable position according to the models.
Red
Magnet (Accessory 5)
RPM wire set-type
(Accessory 3)
Ignition coil positive
Ignition
coil
positive
Spark plug wire
Spark
Coil
Spark plug
cap
pick up
Flywheel
Ignition
pulse
Tachometer
YAMAHA
HONDA
SUZUKI
KAWASAKI
SYM
KYMCO
PGO
Main switch wiring reference:
Power
Ground
Brown
Brown
Black
Green
The color listed above may differ depending
on the model.
Black
Black
Black
Black
Green
Green
Key on
Red
Red
Red
Red
Red
Red / White
Orange
Green
Red / Black
White
Black / Yellow
Yellow / G
reen
YAMAHA
HONDA
SUZUKI
KAWASAKI
BMW
BENNELLI
APRILIA
Light Blue
Yellow /
Blue
Yellow / Black
Black
Gray / Violet
Gray / Violet
DUCATI
BUELL
CAGIVA
H-D
MV
Gray / G
reen
Gray / G
reen
Gray / Yellow
Pink
Pink
Red
TRIUMPH
RPM wiring reference:
The color listed above may differ depending
on the model.
YAMAHA
SUZUKI
HONDA
Yellow / White
Yellow / White
The fuel sensor is electronic type, please don't
parallel connection with the original- otherwise
the fuel gauge won't display.
The wrong installation of the fuel wiring may
cause the meter break.
Green
Fuel indicator wiring reference:
KAWASAKI
SYM
KYMCO
PGO
Black / L Green
Gray
Yellow / White
Yellow / White
The RPM wire installation
Please connect the RPM wire to connect to the ignition coil positive pole.
A.
Brown / Positive wire should be connect to main power switch
Purple / EOBD light (-)
Red-White / Fuel signal (+/ )
-
Red / Postive pole (Connect to
the battery
)
DC 12V
wh027ba01d(P6-2)
