1-1 Accessories
wh033ba26c
The screw hole concaves are the fixing place for the
bolted cover(Accessory 8).
2-2 Installation Instructions
1.LCD meter(Accessory 1)
2.M3 X L20 screw(Accessory 5-A)
3.M3 X P0.5 nut(Accessory 5-B)
4.Meter cover(Accessory 2)
Follow the steps below during
installation.
Follow the steps below during installation.
4.
2.
1.
3.
A
A
1.Infrared temp sensor(Accessory 7)
2.Bolted cover(Accessory 8)
3.M2x5LxP0.4 screw(Accessory 9-A)
A
1.Infrared temp sensor (Accessory 7)
2.M3X5XP0.5 screw(Accessory 9-B)
B
2.
4.
1.
1.
2.
1.
3.
3.
B
2-3
A
B
1.LCD meter(Accessory 1)
2.Meter cover(Accessory 2)
3.Velcro-male(Accessory 6)
4.Velcro-female(Accessory 6)
B
(May install in the
front and the back.)
(May install in the
right and the left.)
2.
NOTE
Choose either Method A or B
according to your need.
NOTE
Choose either Method A or B according to your need.
Infrared Temp Sensor
Installation Instructions
2-1 Wiring Installation Instructions
Red / "+"Wire connect key on
DC 12V
main power switch
LCD meter(Accessory 1)
Power wire
(Accessory 4)
Temp sensor wire
(Accessory 3)
Infrared temp sensor(Accessory 7)
Black / Ground wire connect to the vehicle body or
the engine.
(it must be a good ground)
Mid-way connector
IR
/ Temp
LCD meter X1
1
Meter cover X1
2
IR
/ Temp
Velcro X1 set
6
Infrared temp sensor X1
7
5
M3 X L20 screw X2(A)
M3 X P0.5 nut X2(B)
(A)
(B)
Power wire X1
4
Temp sensor wire X1
3
Bolted cover X1
8
1.3 mm Allen key X 1
10
9
(A)
(B)
M2x5LxP0.4 screw X6(A)
M3X5XP0.5 screw X2(B)
Attention!
● For installation, please follow the steps described. Any damage caused by wrong installation shall be imputed to the users.
● To avoid a short circuit from occuring do not pull or modify the wires during installation.
● Do not disassemble or change any parts. Opening and dissassembling this unit will void any warranty.
● Maintenance and repairs should be executed by our professionals only.
◎
Symbol description:
NOTE
WARNING!
Some procedures must be followed to avoid damages to the instrument.
Certain procedure must be followed to avoid damages to yourself, to the vehicle or others.
LIGHT ON
FLASH
HOLD THE
BUTTON 3
SECONDS
HOLD THE
BUTTON ONE
SECONDS
Thank you for purchasing our product. This product is a multifunction meter and is easy to install. Before using, please read the instructions
carefully and retain them for future reference.
●
