Koso BA005000, Инструкция

Страница: 3 / 5

press SELECT button to enter next
digit.
press SELECT button to enter next
digit.
Press SELECT button to enter the
over rich warning screen.
For example the lean warning
setting was modified from 18.5 to
22.4 now.
5-1
On main screen, press down
SELECT & ADJUST 3 seconds to
enter the setting screen.
The symbol is flashing now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The symbol is flashing now.
If you choose the lean
warning function will close.
Press select button to enter
into airfuel rich setting screen
Press ADJUST button to enter the
over lean setting screen. Press
ADJUST button to turn on or turn
off the function.
press ADJUST button to input the
number you would like to set.
Press ADJUST button to input the
number you would like to set.
Press ADJUST button to input the
number you would like to set.
Press SELECT to enter the over
lean setting screen.
The over rich warning setting
screen.
The symbol is flashing now.
The over lean warning setting.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The digit can be set if flashing
now.
The symbol is flashing now.
If you choose the rich
warning function will close.
Press select button to return to
main screen.
Press ADJUST button to enter the
over lean setting screen. Press
ADJUST button to turn on or turn
off the function.
Press ADJUST button to input the
number you would like to set.
Press SELECT button to enter rich
setting screen.
Press SELECT button to enter nex
digit.
Press ADJUST button to input the
number you would like to set.
5-2
Back to main screen. Press SELECT once to return to
main screen.
Now the over rich warning setting
is 13.8.
The over Ratio rich warning setting.
6-1
The back light showing blue the
showing flash now.
1.Oxygen sensor is not connected
or the connection is bad.
2.oxygen sensor heater has failed.
Solution
1.Check the connection of the
oxygen sensor if the warning
message keeps showing. Please
change to a new oxygen sensor.
2.press any button to restart the
Oxygen sensor after check.
The back light is showing red now.
1. Oxygen sensor has failed.
2.Battery voltage is too low
Solution
1.Check the connection of the
oxygen sensor. If the warning
message keeps showing. Please
change to a new oxygen sensor
2.Check the battery voltage.
Troubleshooting
Press any button to restart
the oxygen sensor after
check
Press any button to restart
the oxygen sensor after
check
1.Oxygen sensor has failed.
Solution
1.Check the connection of oxygen
sensor. If the warning message
keeps showing. Please change
to a new oxygen sensor.
Solution
1.Check the connection of oxygen
sensor. If the warning message
keeps showing. Please change
to a new oxygen sensor.
The back light is showing red now.
Press any button to restart
the oxygen sensor after
check
1.Oxygen sensor has failed.
The back light is showing red now.
Press any button to restart
the oxygen sensor after
check
Please install oxygen sensor as shown in installation 2.2, wrong installation will cause airfuel ration number display abnormal.
CAUTION!
wh004ba021