17
18
‒
CAUTION AFTER USE
CAUTION AFTER USE
ڼѣ
1
֩ᩤ
/
᭗ן
*
ᨊᒬ.
1.
Spray clean water for 2-3 minutes to wash out chemicals from inside of pump, hose and
nozzle after use.
2.
After you finish washing, make sure tank is empty and move pressure adjusting handle
back to "O" position before switching "OFF".
3.
Remove fuel (gasoline) inside of tank and run engine until engine stops automatically at
idling.
4.
Remove dirt from engine, pump, nozzle, etc. If moisture is left, engine gets rusty and it may
cause trouble. Keep this machine in a place out of direct sunlight after drying pump and
nozzle.
Remaining chemical inside of pump or nozzle will harden or cause
deterioration to packing and damage pump.
Caution
Long exposure to direct sunlight may make hose deteriorate and it
may cause burst when spraying.
Caution
Make sure the stop-switch is "OFF" immediately when liquid is gone
and no more spray from nozzle.
Running without liquid may damage pump.
Caution
In case of possibility of freezing, use antifreeze and run through pump,
hose and nozzle after wash with water.
Do not leave antifreeze liquid inside of pump and nozzle. (Read
carefully antifreeze operation manual before use)
Caution
Always keep inside of tank and strainer clean and make sure to use
attached strainer whenever using the machine. If sand and dust get
into pump, it will affect performance, for example delivery volume and
pressure decline.
Caution
[ How to use up fuel ]
1. Adjust pressure adjusting handle to "O"
position and start engine.
2. Move throttle to "LOW".
3. Run until engine stops automatically.
4.
Ტ
For long storage
Უ
Remove engine oil completely
High
High
High
Low
Low
Low
Throttle Lever
Throttle Lever
Throttle Lever
Oil Drain Plug
[ How to attach / remove strainer ]
Strainer
Strainer Clip
Suction Hose
Hose Band
View of inside of tank
from chemical supply hole
Strainer Hole
Push strainer clip inward
and attach / remove strainer.
Strainer Hole
[ How to attach ]
Improper strainer attachment causes poor suction.
Caution
