4
Notes:
● Some parts of the iron have been slightly greased and as a result the iron may smoke slightly
when switched on for the first time. It will not happen again after a few uses.
● Before using for the first time, remove any protective films or stickers from the soleplate and the
cabinet.
● Then clean the soleplate with a soft cloth.
When using the iron for the first time, test it on an old piece of fabric to ensure that the soleplate
and water tank are completely clean.
CHOICE OF WATER
● This iron can be used with normal tap water.
● If the water is particularly hard, it is advisable to use distilled or demineralised water.
● Do not use chemically descaled water or any other liquids for refilling.
HOW TO FILL IN WATER
● Unplug the iron from the wall outlet.
● Remove the spray knob and fill in water through the inlet
- Fill up the maximum level “MAX” of the water tank.
● Put the spray knob back to the iron and ensure that it is secured firmly.
Important : Remove the water after use.
TEMPERATURE CONTROL SETTING
● Always check first to see whether a label with instruction is attached to the article to be ironed.
Follow these instructions in all cases.
● If the ironing instructions are missing, then the label below may help you.
● First you should sort the laundry, Use wool with wool, Cotton with cotton etc. Start ironing the
fabrics requiring the lowest temperature and progress to the higher ones. Because the iron heats
up quicker than it cools down.
● If the fabric consist of various kinds of fibres (Eg. Cotton with polyester) you must always select
the lowest ironing temperature of the composition of those fibres.
LABEL
KIND OF TEXTILE
FIBRE MATERIAL
Synthetic
Acrylic, Modacryt, Polypropylene,
Polyurethane
Synthetic
Acetate
Triacetate
Synthetic
Cupro, Polyamide (Nylon), Polyester,
Modal, Viscose (Rayon)
Silk
Silk
Wool
Wool
Cotton
Cotton
Linen
Linen
Содержание KSW 11X
Страница 1: ...USER S MANUAL...
