5
INSTRUCTION BEFORE USE
JUICING
1. This machine is set with a safety unit, if the handle does not fasten the cover or the cutter seat
is not fastened, the motor will not run, so ensure that all parts are safely aligned.
2. When disassembling or assembling the juicer, press the upper of feed port of the cover with your
hand, then force the handle to slide in or out of cover slot.
3. When disassembling juicing net, first remove the cover and residue barrel, then turn the middle
ring up to 30 degrees by holding juicing nozzle with your hand, and take up, the juicing net will
automatically leave the rotor.
4. Please check power supply for compliance with rated voltage label of the appliance before use.
5. Clean all the parts properly before use (refer to the section “Maintenance and Cleaning”).
6. Please carefully read the “attentions” before using.
1. Before using, please confirm the button switch of the main machine in stop state, in this way,
in case assembly is not completed, starting the main machine can be avoided, so unnecessary
damage for persons or property avoided.
2. Before juicing, first confirm juicing net and rotor are clutched in position, and there is no hard
contact between juicing net cutter and transparent cover. Put the transparent cover on and also
put the handle into the cover slot, then turn on the machine.
3. For using, assemble the appliance and turn on power supply, press switch to let the machine
run with the loud for 5 second. Put the vegetables or fruits into feed port of the juicer, press with
pushing bar evenly and slowly.
4. Note: when pressing food with the pushing bar, force shall be even or indirect, pressing force
shall not be more than 1 kg, avoid sudden force, otherwise, juicing effect will be reduced.
OPERATING TIME
This machine is designed with a circular switch with grading of O, I & II ( O for Stop, I for Weak
grading, II for Strong grading).For juicing, select strong grading and stop for 1 minute after operating
the juicer for 1 minute, then use again. After the above operation is performed for three times, stop
for 15 minutes, do not operate until the motor is cooled, this prolongs the service life of the machine
thus serving you more efficiently.
MAINTENANCE AND CLEANING
1. Keep the motor and parts dry and clean after every use.
2. If the machine is not used for a long time, please store this machine at a dry and well-ventilated
place so as to prevent the motor from being damped and going moldy.
3. Do not wash the main machine. When cleaning, only wipe with wet cloth. Other components may be
washed directly with water, such as pushing bar, cover, middle seat, residue cup, juice nozzle cover.
Содержание Krush KJE 320
Страница 1: ...User s MANUAL ...