Kortho 814532, Руководство пользователя

Страница: 9 / 65

H215 AE
Rev.: 10
kortho
Hot Quick Coder-D
1-1
1 INTRODUCTION
1.1 Qualified personnel
Operators are qualified when they have read and understand this manual. A specific preliminary training is
not required.
Technicians that carry out repairs and technical maintenance on the printer equipment should have
secondary technical education or comparable technical level of knowledge through practical experience.
Installation or servicing of the printer must only performed by qualified personnel of Korthofah BV or a local
distributor, which is designated by Korthofah BV. For customer installations authorisation must be obtained
from Korthofah BV or a local distributor, which is designated by Korthofah BV.
1.2 Elementary personal protection
WARNING:
Keep your hands away from the text holder, the foam roll, the heating ring and the preheat unit. All
these parts are hot. Use the removable text holder handle to exchange text holders.
CAUTION:
Do NOT put your hands between the printer and platen/substrate. The printer stamps with
pressure an print on the substrate.
Please read the SAFETY chapter for more information.
1.3 Intended Use
The Hot Quick Coder ‐ D printers are industrial printers and are designed to print directly on substrates.
Normal use means use under normal conditions as described in this manual.
The printer may not be used in areas, which have a fire or explosion hazard.
Korthofah BV accepts no liability for damage resulting from the improper or uninformed use of the
equipment or caused by maintenance or other work being carried out improperly. They also accept no
liability for the normal wear ‐ and ‐ tear of the printer.