Thank you very much for choosing this device.
Please read these instructions carefully before commissioning and keep it safe for
future reference.
ELECTRIC GRINDER
User manual
1. IMPORTANT SAFEGUARDS
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Keep the manual in a safe place for future re-
ference. If applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
– Make sure your outlet voltage and circuit frequency correspond to the voltage sta-
ted on the appliance rating label.
– Do not use any other appliance at the same time on the same electrical
circuit as it may overload the circuit and blow the fuse or circuit breaker.
– To protect against fire and electric shock, do not immerse the cord, plug,
power base or the grinder body itself in water or other liquid.
– The cord should be run in such a way that there will be no risk of anyone
pulling it inadvertently or tripping over it.
– Do not kink, bend, squash, strain or damage the power cord and protect it from
sharp edges and heat.
– Do not let the cord hang over the edge of a table or bench top.
Do not let it touch hot surfaces.
– Do not pick up or operate the appliance if the power supply cord or plug is
damaged, or after it malfunctions or has been dropped or damaged in any way.
– A damaged cord or plug must be replaced by the manufacturer or a qualified per-
son in order to avoid a hazard.
